Elba EH321, Инструкция по эксплуатации

Страница: 16 / 32

TRIPLE RING BURNER
The triple ring burner must be correctly
positioned (see fig. 5.2); the burner rib
must be enter in their logement as
shown by the arrow.
Then position the cap A and the ring
B (fig. 5.3 - 5.4).
The burner correctly positioned must
not rotate (fig. 5.3).
Fig. 5.4
Fig. 5.5
CORRECT REPLACEMENT
OF THE BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
5.1 and 5.5 ) failure to do so can cause
serious problems.
Check that the electrode “S” (fig. 5.1) is
always clean to ensure trouble-free
sparking.
In the models with safety device, check
that the probe “T” (fig. 5.1) next to each
burner is always clean to ensure correct
operation of the safety valves.
Both the probe and ignition plug must
be very carefully cleaned.
16