Elba EH321, Инструкция по эксплуатации

Страница: 29 / 32

29
ELECTRICAL SECTION
8
8
IMPORTANT: Installation has to be
carried out according to the instruc-
tions provided by the manufacturer.
Incorrect installation might cause
harm and damage to people, ani-
mals or objects, for which the man-
ufacturer accepts no responsibility.
DETAILS
✓
Connection to the electric power sup-
ply must be carried out by a qualified
technician and following the appropri-
ate safety regulations;
✓
Before carrying out the connection to
the power supply, the voltage rating of
the appliance (stamped on the appli-
ance identification plate) must be
checked for correspondence to the
available mains supply voltage, and
the mains electric wiring should be
capable of handling the cooker’s
power rating (also indicated on the
identification plate);
✓
The appliance is supplied without a
power supply plug and therefore if you
are not connecting directly to the
mains, a standardized plug suitable for
the load must be fitted.
✓
The power point must be connected to
a suitable earth wiring, in conformity to
current safety regulations.
✓
The colours of the wires in the hob
power cable may not correspond with
the colours marked on the terminals of
your electrical plug. The plug should in
any case be wired as follows:
– connect the green/yellow wire to the
terminal marked with the letter PE or
the earth symbol or coloured
green/yellow;
✓
It is possible to connect the appliance
directly to the mains supply by means
of a heavy duty switch with 3 mm mini-
mum distance between the contacts.
✓
The power supply cord must not touch
against any hot surfaces and must be
placed so that its temperature does
not exceed 75°C at any point along its
length.
✓
After having installed the appliance,
the power switch or power plug must
always be in a accessible position.
✓
The appliance must have its own
supply; any other appliances installed
near it must be supplied separately.
– N.B. For connections to the mains
power supply, never use adaptors,
reductions or multiple power points
as these may overheat and catch fire.
In the event that installation should
require modifications to the mains supply
wiring system, it is recommended that a
qualified technician be called to carry out
substitution.
The technician will also have to verify
that the cross-section of the electric
cables on the power point match the
appliance’s power rating.
– connect the blue wire to the terminal
marked with the letter N or coloured
black;
– connect the brown wire to the termi-
nal marked with the letter L or
coloured red.
Connection to a good earth wiring system
is absolutely essential.
The manufacturer accepts no responsibility
for any inconvenience caused by failure to
comply with this rule.