Elba EGSI-A1518, Руководство пользователя

Страница: 5 / 8

5
2. Fill up the water tank
Note: Do not fill the water tank with hot water!
: No chemical additive, scented substances or decalcifies to be added into the water
tank!
 Fig 10: Place the water tank on a stable surface.
 Fig 11: Remove the water tank cover and then fill up the water tank with tap water.
Do not fill up the tank exceed the max level (refer the marking at the water tank).
 Figure 12: Close the water tank cover.
 Figure 13: Hold the water tank in reverse direction and then install to the product
body.
3. Ironing instructions

Fig 14: Connect the plug into the wall outlet and switch on the power.

Fig 15: Press the on/off button and the button will turn to red color.

Fig: 16: After power on the iron, wait for one or two minutes until the steam comes
out from the steam vent. Hold the steam head and you can start to iron. Please
hold the steam head and do not contact your body with the steam tube. Use the
steam head vertically and gently iron at the position of up and down.
Caution: Do not direct the steam head towards yourself.

Fig 17: After operating the appliance, turn off the appliance. Dump the remaining
water inside the water tank, and let the appliance dry for 5 minutes.
WARNING! Be careful when empty the water tank after use as there may be hot
water in the reservoir.