Elba EGM-A1400SS, Руководство пользователя

Страница: 4 / 6

3
OPERATING THE APPLIANCE
1. Unpack the appliance and place it on a flat horizontal counter top and wipe the stainless
steel surface and non-stick coating plate with wet soft cloth (do not immerse the appliance in
water or any other liquids for cleaning).
2. It is recommended to coat a layer of vegetable oil when preheating on the non-stick coating
plates (push up the handle to open the non-stick coating plates). This helps to protect the
non-stick coating surfaces.
3. Then push down the handle to close the non-stick coating plates. Press the button at the
side of the handle to lock the non-stick coating plates.
4. Then connect the plug to the wall outlet. Power on the appliance and the red light on the
stainless steel surface will turn on. This means, the unit will start to preheat. Please wait until
the light turns from red to green (refer to the lights on the stainless steel surface). Usually it
will take approximately 4 minutes to preheat the non-stick coating plates.
5. When the light turns green, the appliance is ready for grilling.
6. Carefully open the non-stick coating plates by unlocking the button at the side of the handle.
Put the prepared foods for grilling on the lower plate. It is recommended to use oven mitts or
pot holders to reduce the risk of touching hot surfaces and scalding.
7. Steam may be released from the non-stick coating plates.
Caution: Prevent contacting any parts of your body to the side of the non-stick coating plates
where the steam comes out, especially when opening and closing the plates.
8. The grilling time is approximately 12 minutes, but may vary depends to individual’s taste and
the fillings.
9. Close the non-stick coating plates by pushing down the handle to preserve the heat for the
next grill.
10. Once the cooking process has finished, slowly open the appliance by pushing up the handle
using oven mitts or pot holders. Then remove the remaining grilled foods with a plastic or
wooden spatula. Never use metal utensils as this could cause scratches or damages to
the non-stick coating plates!
11. Some odor may be smelled during initial preheating; this is normal and the smell will
disappear after one or two use.