13
TROUBLESHOOTING
If the laundry is not dried after normal drying program.
1. Check that the lint filter has been cleaned. A blocked filter will restrict the airflow.
2. If the cut-out continues to operate after checking the above points, you should
contact the after sales service centre. Do not attempt to repair the unit.
3. Check that the appliance has the correct weight load in the drum before starting the
appliance.
4. If your appliance does not work properly, check the following before calling the after
sales service centre:-
a) Check that there is a supply of electricity.
b) Check that the door has been properly closed.
c) Check the fuse in the moulded plug.
d) Check that the lint filter has inserted properly in place.
e) Check that the safety cut-out has been operated. Press the reset button at the
rear of the appliance to reset.
Trouble Cause
Solution
Dryer not able to
start
•
The power plug is not plug in proper
way.
•
Dry clothes exceed the capacity.
•
The temperature fuse is cut.
•
Check the power socket, make sure power
plug insert properly to power socket.
•
Make sure the drying clothes cannot exceed
7kg.
•
Please contact the service centre to replace
the temperature fuse.
Dryer is external
hot
•
The lint filter is almost full.
•
The vent hose is dirty.
•
Make sure clean the lint filter all the time.
•
Clean out the vent hose.
Clothes not
completely dry
•
The clothes in machine is too full.
•
Not to take out the clothes
immediately when laundry done.
• The clothes use the wrong program
•
Make sure the clothes are not too full.
•
Keep the laundry in the dryer longer before
taking out.
•
Observe the label on clothes.
Clothes shrink
•
The temperature is too high
•
Observe the label on clothes, if the clothes is
easy to shrink, partially dried, take out the
clothes and then hang the clothes until fully
dry.
