12
CLEANING THE CABINET AND DRUM
Use a soft damp cloth wipe when cleaning the cabinet and drum.
1. Not to rinse with water directly.
2. Not to use scouring pad to clean the drum.
3. Not to use any abrasive powders or corrosive substances which could damage the
surface.
※
Make sure to open the front door for airing after cleaning the drum.
SAFETY RESET
1. These dryers have a safety cut out switch which is activated by temperature.
2. The safety reset button is on the rear of the dryer. If your dryer not operating,
please press the reset button before the dryer start operate again. Please wait for
10 minutes to cool down the appliance before activate the reset button. Use your
finger or a pencil to press the white button in until you feel the reset click.
3. The most common factor of the dyer to overheat is due to the blocked filter. Please
clean the lint filter before the laundry start as to prevent overheating of the dryer.
The cut out switch may operate for the following reason:
1. Lint filter is blocked.
2. Exhaust outlets blocked at the back of the dryer.
3. Poor ventilation in the dryer area.
4. Lightweight garment or foreign object had been blocked over the lint filter.