15
GAS TAPS
✓
In the event of operating faults in the gas taps, call the Service Department
BURNERS AND GRIDS
✓
These parts can be removed and cleaned with appropriate products.
✓
After cleaning, the burners and their flame spreaders must be well dried and correctly
replaced.
✓
It is very important to check that the burner flame spreader and the cap have been
correctly positioned. Failure to do so can cause serious problems.
✓
In the models with safety device, check that the probe next to each burner is always
clean to ensure correct operation of the safety valves.
✓
In appliances with electric ignition keep the electrode clean so that the sparks always
strike.
✓
Note: To avoid damage to the electric ignition do not use it when the burners are
not in place.
Fig. 4.2
Fig. 4.1
F
C
Ignitor “
S
”
(some models only)
Flame failure probe “
T
”
(some models only)
