manualshive.com logo in svg

Elba E 8550FG2 Series, Инструкции по использованию - Советы по установке, Страница: 34 / 36

Поделиться
Скачать
Elba E 8550FG2 Series Скачать руководство пользователя страница 34

34

ELECTRICAL SECTION

9

IMPORTANT:  The  cooker  must  be  in

-

stalled in accordance with the manu-

facturer’s instructions.

Incorrect installation, for which the 

manufacturer accepts no responsibili

-

ty, may cause damage to persons, ani

-

mals and things.

N.B.  For  connection  to  the  mains,  do 

not use adapters, reducers or branching 

devices as they can cause overheating 

and burning.  

If the installation requires alterations to the 

domestic electrical system or if the socket 

and appliance plug are incompatible, call 

an expert.

He should also check that the socket cable 

section is suitable for the power absorbed 

by the appliance.

GENERAL

• 

Connection to the mains must be carri-

ed out by qualified personnel in accor-

dance with current regulations.

• 

The appliance must be connected to 

the mains checking that the voltage 

corresponds to the value given in the 

rating plate and that the electrical ca-

ble sections can withstand the load 

specified on the plate.

• 

Models supplied with plug: The plug 

must be connected to an earthed so-

cket in compliance with safety stan-

dards.

• 

Models supplied without plug: The 

appliance is supplied without a power 

supply plug and therefore if you are 

not connecting directly to the mains, a 

standardized plug suitable for the load 

must be fitted.

• 

The appliance can be connected di-

rectly to the mains placing an omni-

polar switch with minimum opening 

between the contacts of 3 mm betwe-

en the appliance and the mains.

• 

The power supply cable must not 

touch the hot parts and must be posi-

tioned so that it does not exceed 75°C 

at any point.

• 

Once the appliance has been instal-

led, the switch or socket must always 

be accessible.

• 

If the power supply cable is damaged 

it must be substituted by a suitable ca-

ble available in the after sales service.

The connection of the appliance to 

earth is mandatory.

The manufacturer declines all respon-

sability  for  any  inconvenience  resul

-

ting from the inobservance of this con

-

dition.

Before  effecting  any  intervention  on 

the electrical parts of the appliance, 

the connection to the network must be 

interrupted.

Содержание E 8550FG2 Series





































Отзывы:

Нет отзывов