manualshive.com logo in svg

Elba E 8550FG2 Series, Инструкции по использованию - Советы по установке, Страница: 27 / 36

Поделиться
Скачать
Elba E 8550FG2 Series Скачать руководство пользователя страница 27

27

• 

the flexiple pipe does not exceed 2000 mm in length (or refer to applicable local re-

gulations) and does not come into contact with sharp edges, corners or moving parts. 

Use a single flexible pipe only; never connect the cooker with more than one flexible 

pipe.

• 

the flexible pipe can easily be inspected along its entire length to check its condition; if 

it has an expiry date, it should be replaced before that date.

• 

if using a flexible pipe which is not entirely made of metal, make sure that it does not 

come into contact with any part of the cooker with a surface temperature of 70°C or 

above (or refer to applicable local regulations).

• 

the hose is not subject to excessive heat by direct exposure to flue products or by 

contact with hot surfaces.

• 

the rigid or flexible pipe is replaced if it shows signs of wear or damage.

• 

a gas pressure regulator, in compliance with the applicable local regulations, is instal-

led when connecting to an LPG cylinder.

• 

you inform the customer that the cylinder valve or the supply valve immediately by the 

appliance should be closed when the cooker is not in use.

• 

you inform the customer that the rigid or flexible pipe should not be subjected to corro-

sion by acidic cleaning agents.

After connecting the cooker to the gas supply, make sure that you

• 

check that the connections are correctly sealed using a soapy solution, but never a 

naked flame.

• 

check whether the injectors are correct for the type of gas being used.

• 

replace the sealing washer on the slightest sign of deformation or imperfection. The 

sealing washer is the part which guarantees a good seal in the gas connection.

• 

use two spanners when connecting the rigid or flexible pipe (Fig. 8.3).

Gas connection with rigid or flexible pipe

Note: if already fitted on the inlet pipe, remove the rubber hose holder

Manifold 

male

pipe fitting

Inlet pipe

1/2” G cylindrical

(ISO 228-1) male

1/2” G cylindrical

(ISO 228-1) female

1/2” G cylindrical

(ISO 228-1) female

Sealing

washer (#)

Flexible pipe

(not supplied)

Rigid pipe

(not supplied)

Fig. 8.3

(#) If not already fitted on the inlet pipe,

     it is supplied with the appliance in a 

     separate kit

Содержание E 8550FG2 Series





































Отзывы:

Нет отзывов