3
8
2. Install the cooker hood right abo ve the hob.The recommend ed distan ce
between the hob and the lower edge of th e cooker hood is minimum
650 mm and maximum 700mm. (Fig. 2)
3. In order to get the optimum performance, do not elongate th e exhaust
pipe too long, and try to make the bend of exhaust pipe less and biggest,
ensure the connection is airproof.(Fig. 3)
4. After hanging the unit on the wall, ensure the hood is level and vertical.
(Fig. 4)
Fi g.1
Fi g.2
5. The air outlet must not be connected to chimney flues or combustion gas
ducts. The air outlet must under no circumstances be connected to venti-
lation ducts for room in which fuel-burning appliances are installed.
Fig .3
3. Clean the aluminium filter once a week or according to use status.
Press the buckle of the aluminium filter slightly, take off the aluminium
filter wash them by Dishwashel o r you can put it into warm soapy
water using mild detergent, wipe the aluminium filter with soft brush.
Replace the filter after it is dry.
4. Clean the motor fan and other inside parts once half y ear or according
to use by QUALIFIED PERSON.
5. DO NOT cleaning motor with water or other liquid.
1. Take out the filters.
2. Loose the wire insert
and power supp ly wire.
3. Loose earth wire.
4. Loose blower fixed
screws.
5. Take out the blower assembly.
Motor f ix cover
Fan
Charcoal filter
Fan fixed sc rews
Blower asse mbly
Wire inse t
Powe r supply
wire
Earth wire
Blower fixed screw s
CLEAN THE BLOWER ASSEMBLY
6. Take out the ch arcoal filter like arrowhead
s direction( if y ou have
’
installed charcoal filter).
LEVEL
VERTICAL
Fig.4
LEAN
LEAN
8. Use hexangular screwdriver to loose the blower fix screws.
9. Take out the fan.
7. Take out the motor fix cover like arrowhead
s direaction.
’
文件使用
"pdfFactory"
试用版本创建
А
www.fineprint.cn