2
9
MAIN PARTS NAME
1. Inn er d uct cover
3. Outer duct cover
2. Duct b racket
4. Exhaust pi pe
6. Bo ttom cover
INSTALLATION REQUIREMENT
1. Do not install the cooker hood where there are many doors or windows
in other to avoid to effecting the exhaust efficiency of the hood caused
air convection. (Fig. 1)
by
CAUT ION: LAMP UNIT MAY BE HOT!WAIT UNT IL
USE THE SAME TYPE LIGHT BULB!
UNIT IS COOL.
AND
Make sure all control switches are off,and cooker hood is unplugged.
Pls follow below instructions:
TO REPLACE LIGHT BULB
1. Use a flat head screwdriver to pop out the lamp suba sse mbly, then
disconnec t la mp from the internal wires.
2. Unloose th e screw using cross he ad screwdriver.
3. Remove the lamp cover and take out of lamp bulb.
4. Replace a new 2W lamp bulb, push bulb sec urely into light socket.
5. Replace the lamp cover, fix it with sc rews.
6. Connec t th e lam p suba sse mbly with internal electrical wire and push the
light into the hood lamp hole.
Warnin g!
Make sure the bulb has cooled before you touch it !
5. Bl ower box
7. Glass
10. The same way to take out the other fan.
11. After clean, please assemble it like the opposite ways of loose it.
Note: Left motor fixed cover and fan have a little difference from right
side ,there is a letter
R
on the right side cover and a letter
L
on the left side cover Don
t
＂ ＂
＂ ＂
’
.
assemble it in wrong side.
8. Filter
文件使用
"pdfFactory"
试用版本创建
А
www.fineprint.cn