Elba 9T VBC 634, Инструкция по использованию

Страница: 53 / 56

53
PE N L
1
(L
2
)
D
N
B
P E
A
L
Fig. 10.1
Fig. 10.2
ELECTRICAL FEEDER CABLE CONNECTION
The operations must be executed by a qualified technician.
To connect the supply cable:
•
Remove the screws securing the cover “
A ” on the rear of the cooker (fig. 10.1).
•
Feed the supply cable through the cable clamp “
D ” (fig. 10.1). The supply cable must
be of a suitable size for the current requirements of the appliance; see the section
“Feeder cable specifications”.
•
Connect the wires to the terminal block “
B ” as shown in the diagram in figure 10.2; or
connect the phase and neutral wires to the terminal block “
B
” and the earth wire to the
terminal “
PE ” as shown in figure 10.1.
•
Take up any slack in the cable and secure with the cable clamp “
D
”.
•
Replace the cover “
A
”.
N.B. The earth conductor must be left about 3 cm longer than the others.
FEEDER CABLE SPECIFICATIONS
TYPE H05RR-F
220-240 V~ 3 x 2,5 mm
2 (**)
(**) Connection with wall box connection
220-240V~