Elba 9T VBC 634, Инструкция по использованию

Страница: 44 / 56

44
a
G
b
c d
G
Fig. 9.4 Fig. 9.3
FOR FRANCE ONLY
- POSSIBLE GAS CONNECTIONS -
Appliances which cannot be built in
(class 1)
For gases supplied by a pipe, the
connection can be made using one of
the following:
• by fitting the proper hose holder (if
not supplied with the appliance it can
be purchased by contacting the After-
Sales Service), interposing a sealing
gasket, and using a suitable flexible
hose according to NF D 36-102 with
an internal diameter of 15 mm (fig.
8.3c); make sure that the flexible hose
is pushed over the hose connector to
the full depth, and secured with a hose
clamp (not supplied);
(ONLY FOR ALREADY EXISTING
GAS INSTALLATIONS)
•
a rigid pipe with screw-nut;
• a metal corrugated flexible hose
according to NF D 36-121 (fig. 9.4a);
• a flexible hose with mechanical ferrule
according to NF D 36-103 or D 36-100
(fig. 9.4b).
For butane-propane distributed by
cylinder or tank, the connection is made
using one of the following:
• by fitting the proper hose holder (if
not supplied with the appliance it can
be purchased by contacting the After-
Sales Service), interposing a sealing
gasket, and using a suitable flexible
hose according to XP D 36-110 with
an internal diameter of 6 mm (fig.
8.3d); make sure that the flexible hose
is pushed over the hose connector to
the full depth, and secured with a hose
clamp (not supplied);
(ONLY FOR BUTANE/PROPANE
DELIVERED IN MOBILE
CONTAINERS OR FOR ALREADY
EXISTING GAS INSTALLATIONS)
•
a rigid pipe with screw-nut;
• a metal corrugated flexible hose
according to NF D 36-125 (fig. 9.4a);
• a flexible hose with mechanical ferrule
according to XP D 36-112 (fig. 9.4b).