Elba 9T VBC 634, Инструкция по использованию

Страница: 35 / 56

35
E
F
OVEN DOORS - CLEANING THE
PANES OF GLASS
The oven door has two panes. To clean these,
you need to remove the inner pane.
REMOVING THE INNER PANE OF GLASS
• Open the door to the full extent (fig. 7.9a).
• Open the lever “ A
” completely on the left and
right hinges (fig. 7.9b).
• Hold the door as shown in fig. 7.9d.
• Gently close the door (fig. 7.9c) until left and
right hinge levers “
A
” are hooked to part “
B
” of
the door (fig. 7.9b).
• Gently pull out the inner pane of glass (fig.
7.10a)
• Clean the glass with an appropriate cleaner.
• Dry thoroughly, and place on a soft surface.
• Now you can also clean the inside of the outer
glass.
Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the panes of glass
since they can scratch the surface, which
may result in shattering of the glass.
REPLACING THE INNER PANE OF
GLASS
• Check that the four rubber pads are in place
(“
D
” in fig. 7.10b).
• Check that you are holding the pane the correct
way. You should be able to read the wording
on it as it faces you.
• Insert the inner pane in the left “
E
” and right “
F
”
side guides (fig. 7.10c) and gently let it slide
up to the retainers “
H
” (fig. 7.10d).
• Unlock the oven door by opening it completely
and closing the lever “
A
” on the left and right
hinges (fig. 7.9a).
Fig. 7.10a
Fig. 7.10b
Fig. 7.10c
Fig. 7.10d
D
H
It is normal the opened gap between the top
edge of the inner glass and the top of the door.
This allows the cooling air circulation.