14
Big One Xtreme II_1.0_ENG.docx
Elaut NV
MANUAL SETUP (AUTOMATIC CLAW OFF)
In manual setting, the operator himself is responsible for the settings, and there is no correction on the claw power if set
incorrectly.
Step 1 : Set the price
see Quick Start p. 20
Insert the correct purchase price of the product in the
"Product cost" field.
Than insert the vending price (= how much the product
should bring in) in the “Est. price out” field.
As a result of these 2 settings, the desired payout
percentage will be calculated.
) 90
Once this is done, select “S” to restart the game
, so the
payout regulator can start with the new values.
Step 2 : Adjust claw power and pickup time
see Claw Settings p. 26
Make sure “Automatic claw” is OFF (0).
Retain power (23% minimal) :
power to release the
product.
Place a product in the claw and close. Use + or
–
to
change the retain power until the product falls down.
Pickup power :
power to pick up the product aka the win
power. Set manually at minimum the double of the
retaining power (use + or -).
Randomize pickup time
: from pickup power to release
power, based on the installed pickup time (Randomize
pickup time ON = 1).
