User Manual
Doc.Ref : EVO-KNX-UM
EVO-KNX
– Paradox KNX Interface
Revision :
2.01
Page :
18 of 23
© ELAUSYS SPRL
This document cannot be reproduced fully or partially without written authorization
5. CONFIGURATION
5.1
PHYSICAL DEVICE
ELAUSYS devices are configured using the ETS tool. You should first download and install the free
version of ETS tool before you continue.
The EVO-KNX Interface must be assigned a physical address on the KNX network. Assign a free
address to the module, in our example we choose 1.1.50.
5.2
PARAMETERS
Once a KNX physical address is set, open the parameter tab to configure the interface.
The parameters are grouped into sections: A general section and a section for each area configured.
In the general section, enter a valid user code from the Paradox system to enable area control.
