Elation SMARTY MAX, Руководство пользователя

Страница: 20 / 46

20
L A M P R E P L A C E M E N T
LAMP INSTALLATION PROCEDURE
7. Gently grab lamp base with thumb and index finger and pull lamp out from fixture.
8. Using thumb and index finger, gently install the new lamp. Position lamp so it is seated properly,
then swing down the retention clip, squeezing the ends to lock/secure the lamp into place.
9.
Brush away any debris as this could compromise fixture performance.
10. Gently attach (2x) spade receptacle-terminals securely to the base of the lamp.
11.
Replace lamp access panel and secure (3) Philips-head screws marked
“A”
,
“B”
, and
“C”
.
12. Be sure to reset the LAMP HOURS in the system menu to prevent the protection circuitry
from accidently shutting off the lamp during normal operation. If the lamp protection circuitry
has already been initiated and the
LAMP HOURS
is not reset, the
“Replace the Lamp”
warning will continue to flash, and fixture will eventually shut down. To reset
LAMP HOURS
,
see instructions on the next page.