23
FUNCTION - Auto Program
Define fixture mode
(Master or Alone)
for running Auto Programs. Select desired internal
programs under
“Select Program”
, set the number of steps under
“Edit Program”
, and
edit individual scenes under
“Edit Scenes”
.
PERSONALITY - Status Settings - Address Via DMX
When ON, define the desired DMX address via an external controller.
NOTE: This process assumes the fixture DMX address is set to 001. If fixture DMX address is not at
001, you must adjust the channel numbers accordingly in order for this feature to work.
For example: if your fixture address is 010, then Channel 1 becomes Channel 10, Channel 2 becomes
Channel 11, and Channel 3 becomes Channel 12.
1.
!
Connect the fixture to the external controller and power ON.
2.
!
Set the DMX value of
Channel 1
on the controller to
(7)
.
3.
!
Set the DMX value of
Channel 2
on the controller to
(7)
or
(8)
.
When set to
(7)
, the DMX address can be set between
(1)
and
(255)
.
When set to
(8)
, the DMX address can be set between
(256)
and
(511)
.
4.
!
Using
Channel 3
on the controller set the desired DMX address of the fixture.
Example 1:
If the desired DMX address is
57
, set
Channel 1
to a value of
(7)
, set
Channel 2
to a
value of
(7)
, and then set
Channel 3
to a value of
(57)
.
Example 2:
If the desired DMX address is
420
, set
Channel 1
to a value of
(7)
, set
Channel 2
to a
value of
(8)
, and then set
Channel 3
to a value of
(164)
. (256+164=420)
5.
!
After setting
Channel 3
to the desired DMX address value, wait for approximately 20
seconds for the fixture to complete the address reset function.
PERSONALITY – Service Setting – Password (050)
NOTE
: The Service Password MUST be entered in order to access the following menus:
RDM PID, Ethernet IP, Ethernet IP Mask,
and
Clear Err. Info.
Содержание SATURA PROFILE
Страница 1: ...SATURA PROFILE user manual...
Страница 40: ......
