Elation PROTEUS RAYZOR 760, Руководство пользователя

Страница: 27 / 58

27
L I G H T I N G C O N S O L E PAT C H I N G G U I D E L I N E S
There are also two additional parts for a primary control of the PROTEUS RAYZOR 760,
which creates four separate control areas for the fixture. It is recommended to create fixture
groups on the lighting controller for each area of the fixture. (see below)
Main Fixture Primary Pan, Tilt, RGBW Color, Strobe, Dimmer, Zoom, FX Controls
RGBW Cells 1-7 Red, Green, Blue, White per each individual cell
Spark LED Main Primary Spark LED Strobe, Dimmer
Spark LEDs 1-28 Spark LED Dimmer per each individual LED
SparkLED is not available as a mode in the fixture menu but must be provided as a con-
sole control profile for easy programming of the fixture. Use the PROTEUS RAYZOR 760 in
Extended mode and patch appropriate parts of the RGBW Pixels and SparkLED fixtures on
your control system to access all 80 channels.
On the lighting controller, patch the two fixture types (RGBW and SparkLED), separating the
SparkLEDs into a different ID range. (see below)
RGBW Pixels for Channels 1-52
SparkLEDs for Channels 53-80
ONYX Main and Sub Fixture ID patch example below for a single PROTEUS RAYZOR 760 fix-
ture.
ID TYPE ADDRESS
1.0 RGBW Pixels Main 1
1.1 Pixel 1 22
1.2 Pixel 2 26
1.3 Pixel 3 30
1.4 Pixel 4 34
1.5 Pixel 5 38
1.6 Pixel 6 42
1.7 Pixel 7 46
1.8 Spark LED Main 50
101.1 Spark LED 1 53
101.2 Spark LED 2 54
101.3 Spark LED 3 55
101.4 Spark LED 4 56
... ... ...
101.28 Spark LED 28 80