Power Wash 250™
©Elation Professionals® Los Angeles, Ca. 90058 -
www.ElationLighting.com
-
Page 7
Safety Instructions
The Power Wash 250™ is an extremely sophisticated piece of
electronic equipment. To guarantee a smooth operation, it is
important to follow the guidelines in this manual. The
manufacturer of this device will not accept responsibility for
damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
1. Always be sure that the fan and the air inlets remain clean and are never
blocked. Allow about 6” (15cm) between this fixture and other devices or a
wall to allow for proper cooling.
2. Never
touch
the
fixture
during
normal
operation. This can cause severe
personal injuries and/or damage to the fixture.
3. Be sure to unplug the POWER WASH 250™ from the power outlet before
performing any service related issues.
4. Allow at least 30 minutes after disconnecting the AC before you open the
POWER WASH 250™
. To prevent personal injury, never touch the lamp if you
are not absolutely sure it has cooled.
5. Never look directly into the lamp beam. You risk injury to your retina, which
may induce blindness.
6. Be
sure
to
track
and
record
the lamp running time. The lamp should be
changed at the end of the specified lamp life, regardless of lamp output. You
may also have to change the lamp if it shows any deformations or damage.
The same is with all glass components, color filters, lenses and mirrors.
7. For
safe
operation,
follow
the
Installation
guide
described
in
chapter
two
of
this manual. Operating the
POWER WASH 250™
without suited safety aids
such as safety cables or clamps can increase the risk of damage and/or
personal injury.
8. Qualified
personnel
should
only
perform
installation.
9. When
mounting
this
fixture,
use
only
the
original
rigging
parts
included
with
this fixture. Any structural modification will void the original manufactures
warranty and may increase the risk of damage and/or personal injury.
10.
To reduce the risk of fire or shock, do not expose this unit to rain or moisture.
11.
Do not attempt to operate this fixture if the power cord is frayed or damaged.
