background image

©

Elation Lighting

® - 

www.elationlighting.com - Haze 400™ Instruction Manual Page 5

Please read and understand the instructions in this manual 

carefully and thoroughly before attempting to operate this 

unit.  These instructions contain important information regarding 

safety during use and maintenance. Please keep this manual 

with the unit, as future reference.

©

Elation Lighting

® - 

www.elationlighting.com - Haze 400™ Instruction Manual Page 6

•   Keep this device dry at all times. Do not spill water or other liquids in to or 

 

 on to your haze machine. Be sure that all the haze fluid is kept inside 

 

 the fluid reservoir.

•   Be sure to save the packing carton in case you may ever have to return 

 

 the unit for service.

•   Never overfill the unit’s reservoir. Overfilling may cause the unit to clog.

•   This unit is designed for interior use only. Do not use this unit outdoors.

•   Be sure that the local power outlet match that or the required voltage for 

 

 your haze machine.

•   Do not attempt to operate this unit if the power cord has been frayed or 

 

 broken. Please route your power cord out of the way of foot traffic.

•   Do not attempt to remove or break off the ground prong from the electrical 

 

 cord.  This prong is used to reduce the risk of electrical shock and fire in 

 

 case of an internal short.

•      Disconnect from main power before making any type of connection.

•      Do not remove the top cover under any conditions. There are no user 

 

 serviceable parts inside.

•      Disconnect the unit’s main power when left unused for long periods of 

 

 time.

•   Never connect this unit to a dimmer pack

•   Always be sure to mount this unit in area that will allow proper ventilation. 

 

 Allow about 6” (15cm) between this device and a wall.

•   Never block the ventilation holes.

•      Do not attempt to operate this unit, if it becomes damaged in any way.

•   Never operate this unit when it’s cover is removed.

•   For adult use only.  Hazer must be installed out of the reach of children.  

•   Never leave the unit running unattended.  

•   Never aim the output at open flames.

•   Never add flammable liquids of any kind (oil, gas, perfume) to the hazer 

 

 liquid.

•   Use only Elation

®

 brand haze liquid.

•   Always make sure there is sufficient liquid in the hazer liquid tank.  

 

 Operating this unit without liquid may cause permanent damage to the 

 

 machine.

•   Always mount this unit in an upright position.

 Haze 400™ Safety Warnings

 Haze 400™ General Instructions

•  No Warm-Up time

•  560 watt professional heater core.

•  2500 cubic feet of haze output.

•  Rear on/off switch

•  Built in fuse protection

•  2.5 liter tank capacity.

•  Wired timer/volume remote control.

•  Standard DMX -512 protocol.

•  Optional wireless remote control.

•  Optional 10 meter remote extension cable

 Haze 400™ Features

 Haze 400™ Unpacking

Every Haze 400™ has been thoroughly tested and has been shipped in 

perfect operating order. Carefully check the shipping carton for damage 

that  may  have  occurred  during  shipping.  If  the  carton  appears  to  be 

damaged, carefully inspect your fixture for any damage and be sure all 

equipment necessary to operate the system has arrived intact. In the 

case damage has been found or parts are missing, please contact our 

toll free customer support number for further instructions.   

Содержание HAZE 400









Отзывы: