Remote Functions and Controls:
Caution: Before removing or replacing the remote unit, discon-
nect the power supply.
Duration:
1. This function allows you to set the time the haze will burst when
in the timer mode.
2. You can adjust the time the hazer will burst from one second to
200 seconds.
3. To set the duration, turn the duration knob in a clockwise/counter-
clockwise direction. Turning the knob clockwise will increase the
duration, turning the knob counter-clockwise will decrease the
duration.
Interval:
1. In timer mode, this function allows you to set the time interval
between haze burst.
2. Haze burst interval can be set from one second to 200 seconds.
3. To set the interval turn the interval knob in a clockwise/counter-
clockwise direction. Turning the knob clockwise will increase the
interval, turning the knob counter-clockwise will decrease the
interval.
Timer On/Off:
1. This Function allows you to set the hazer on an automatic setting.
You can set the Interval, Duration, and as described on the
previous page.
2. This button allows you turn the timer function on and off. A glowing
yellow LED will indicate this function is on.
©
Elation Lighting
®
- www.elationlighting.com - Haze 400™ Instruction Manual Page 11
©
Elation Lighting
®
- www.elationlighting.com - Haze 400™ Instruction Manual Page 12
Haze 400™ Remote Control
Remote Control:
The haze machine comes with a full function remote control.
The remote control is connected to the rear of the unit. Be
sure to connect the remote to the proper jack. Do not try to
force the remote connection in to the jack. You could damage
your remote. The remote has three LED’s that will indicate the
different functions.
If you experience low output, mechanical noise or no output
at all, unplug immediately. Check fluid level, the external
fuse, remote connection, and power from the wall. If all of
the above appears to be O.K., plug the unit in again. If
hazer does not function after 30 seconds, discontinue oper-
ation or permanent damage to the unit may result. Return
the machine to your Elation dealer. Always drain tank before
mailing or transporting this unit.
Haze 400™ Operating Instructions
