Elation E Spot Led II, Руководство пользователя

Страница: 7 / 51

w w w . e l a t i o n l i g h t i n g . c o m
7
E SPOT LED II
™
User Manual 1.0
S A F E T Y I N S T R U C T I O N S
The E SPOT LED II
™
is an extremely sophisticated piece of electronic equipment.
To guarantee a smooth operation, it is important to follow the guidelines in this
manual. The manufacturer of this device will not accept responsibility for damages
resulting from the misuse of this fixture due to the disregard of the information
printed in this manual.
•
For proper operation, follow the Installation guidelines described on page 10 of this manual. Only qualified
and certified personnel should perform installation of this fixture and only the original rigging parts
(brackets) included with this fixture should be used for installation. Any modifications will void the original
manufactures warranty and increase the risk of damage and/or personal injury.
•
Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may
induce blindness. Those suffering from EPILEPSY should avoid looking directly into the light source of this
unit at all times.
•
The fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between this fixture
and other devices or a wall for proper cooling.
•
Always disconnect from main power source before performing any type of service and/or cleaning
procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the wire portion
of the cord.
•
Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power
cord is damaged, replace it immediately with a new one of similar power rating.
This device falls under PROTECTION CLASS 1 . It’s essential this device is
grounded properly, and only qualified personnel perform all electrical connections.