Elation E Spot Led II Скачать руководство пользователя страница 6

 
 

w w w . e l a t i o n l i g h t i n g . c o m    

 

                                                                                                                                                                                        6

                                                                       

E   SPOT   LED   II

™   

User   Manual   1.0

 

2 - Y E A R   L I M I T E D   W A R R A N T Y

 

A.    Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to be free 

of manufacturing defects in material and workmanship for a period of two years, (730 days) from the date of 

purchase. This warranty shall be valid only if the product is purchased within the United States of America, 

including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase 

by acceptable evidence, at the time service is sought.   

B.    For warranty service, send the product only to the Elation Professional® factory. All shipping charges must 

be  pre-paid.  If  the  requested  repairs  or  service  (including  parts  replacement)  are  within  the  terms  of  this 

warranty, Elation Professional® will pay return shipping charges only to a designated point within the United 

States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be 

shipped with the product. If any accessories are shipped with the product, Elation Professional® shall have no 

liability what so ever for loss of or damage to any such accessories, nor for the safe return thereof.     

C.      This warranty is void if the serial number has been altered or removed; if the product is modified in any 

manner  which  Elation  Professional®  concludes,  after  inspection,  affects  the  reliability  of  the  product;  if  the 

product  has  been  repaired  or  serviced  by  anyone  other  than  the  Elation  Professional®  factory  unless  prior 

written authorization was issued to purchaser by Elation Professional®; if the product is damaged because not 

properly maintained as set forth in the instruction manual.   

D.    This  is  not  a  service  contract,  and  this  warranty  does  not  include  maintenance,  cleaning  or  periodic 

check-up. During the period specified above, Elation Professional® will replace defective parts at its expense, 

and  will  absorb  all  expenses  for  warranty  service  and  repair  labor  by  reason  of  defects  in  material  or 

workmanship.    The  sole  responsibility  of  Elation  Professional®  under  this  warranty  shall  be  limited  to  the 

repair of the product, or replacement thereof, including parts, at the sole discretion of Elation Professional®. All 

products covered by this warranty were manufactured after January 1, 1990, and bare identifying marks to that 

effect. 

E.    Elation  Professional®  reserves  the  right  to  make  changes  in  design  and/or  improvements  upon  its 

products without any obligation to include these changes in any products theretofore manufactured.   

F.    No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with 

products described above. Except to the extent prohibited by applicable law, all implied warranties made by 

Elation  Professional®  in  connection  with  this  product,  including  warranties  of  merchantability  or  fitness,  are 

limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, 

including warranties of merchantability or fitness, shall apply to this product after said period has expired. The 

consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; 

and  under  no  circumstances  shall  Elation  Professional®  be  liable  for  any  loss  or  damage,  direct  or 

consequential, arising out of the use of, or inability to use, this product.   

G.    This warranty is the only written warranty applicable to Elation Professional® Products and supersedes all 

prior warranties and written descriptions of warranty terms and conditions heretofore published.

 

Содержание E Spot Led II




















































Отзывы: