Elation E Spot Led II, Руководство пользователя

Страница: 19 / 51

w w w . e l a t i o n l i g h t i n g . c o m
19
E SPOT LED II
™
User Manual 1.0
MAIN FUNCTIONS
0. ADDRESS MENU
AOO1 - A511 (Value) This is where you set the fixtures DMX address.
Setting/Changing the DMX Address
After applying power to the E SPOT LED II™ the LED will display the fixture’s current
DMX address immediately after the reset sequence. If the fixture is not receiving a
DMX signal the display will flash continuously. To set or adjust a DMX address, please
follow the procedure below:
1. Switch on the E SPOT LED II™ and wait for the fixture reset process to finished.
2. Press MODE/ESC to access the main menu. Toggle through the menu by pressing
UP and DOWN until the display shows A001 . Press ENTER to make changes to
the DMX address; the current three-digit address will immediately begin to flash.
3. While the current three-digit address is flashing, press UP and DOWN to select
adjust the address. Lock your new address into the unit’s memory by pressing
ENTER . After the new address has been successfully stored into the fixture’s
memory the LED will briefly readout PASS .
The DMX address is non-destructible and will remain in the fixture’s memory even when
power to the fixture has been switched off. Memory is backed-up and retained by an internal
power source with a five year shelf life.
1. TEST MENU
T-01 - T-XX (Test) Tests the functions of channel.
1. Access the main menu.
2. Press UP until “TEST” is displayed, press ENTER .
3. The display will read “ T-01” . You can now press UP and test the different channels.
For example: If you press UP until “T-05” is displayed, the unit will test the color
channel, changing the color one by one and show the rainbow effect with different
speeds .
4. Press MODE/ESC to exit.