Elation DMX-SOLO 256 Скачать руководство пользователя страница 4

DO NOT

 dismantle or modify the unit.

Protect the unit from excessive dryness or humidity (ideal conditions are between 
35% and 80%).

           In places with a temperature of over 45  C

 or less than 2  C/35.6  F.

/113  F

        In places subject to vibrations or bumps.

        In places subject to excessive humidity.

NEVER

 use the unit under the following conditions:

This unit must only be operated by adults. 

DO NOT

 allow children to tamper or play 

with it.

Packaging material (plastic bags, polystyrene foam, nails, etc.) 

MUST NOT

 be left 

within children's reach, as it can be dangerous.

After having removed the packaging check that the unit is 

NOT

 damaged in any way. 

If in doubt, 

DON'T

 use it and contact an authorized dealer.

This unit is 

NOT

 intended for home use.

NEVER

 try to repair the unit yourself. Repairs by unqualified people could cause 

damage or faulty operation. Contact your nearest dealer.

DO NOT

 open the unit--there are no user serviceable parts inside.

STOP

 using the unit immediately In the event of serious operation problems and 

either contact your local dealer for a check or contact us directly.

Should any liquid be spilled on the unit, 

DISCONNECT

 the power supply to the unit 

immediately.

DO NOT

 make any inflammable liquids, water or metal objects enter the unit.

Read the instruction in this manual carefully and thoroughly, as they give important 
information regarding safety during use and maintenance. Keep this manual with 
the unit, in order to consult  it   in  the   future.  If the unit is sold or given to another 
operator, make certain that it always has its manual,    to enable  the new owner to 
read about its operation and  re lative instructions.

Features

General Instructions

Thank you for your purchase. This product 
features include:

1

2

Warnings

Cautions

256 DMX channels

24 banks of 40 programmable scenes

Each scene consists of 256 DMX channels, fade time enable

40 chases, each holds up to 99 steps(recorded scenes).

Playback of one or more chases or memories at a time

8 memories, each holds up to 99 steps(recorded scenes)

All data can be sent or received between two units

Delete unwanted scenes, steps, chases or memories

Blackout master

Built-in microphone for audio chase or memory

Two or more units can be linked

DMX polarity select

Power failure memory

Содержание DMX-SOLO 256





























Отзывы: