2. Operation Guide
2. Operation Guide
2.3.3 Delete a Chase of Scenes
2.4.1 Record steps into a Memory
14
13
1. Enter Record mode, the Segment Display shows
"CHAS".
RECORD
C H A S
AUDIO/DEL
C H A S
2. Keep pressing AUDIO/DEL button, tap the button
that holds the chase you wish to delete, all LED's
shall flash briefly three times indicating this chase
has been deleted.
CHASE 1-40
2.4 Recording Memories
2.4.1 Record steps into a Memory
CHASE
1. Apply power on, tap Chase button causing its LED
to light or flash.
2. Press and hold down Record button for 3 seconds,
the Record LED's will flash indicating recording is
active, the Segment Display reads "CHAS", and the
recorded Memories will be indicated by the lit LED's
near them.
RECORD
C H A S
MEMORY 1-8
SCENE 1-40
5. Tap one of 1-40 buttons causing its LED to flash,
which means you've selected the scene.
You may use UP/DOWN button to select the bank
that contains the scene you want.
3. Tap the button(Memory 1-8) you wish causing its
LED to flash, the Segment Display shows "ST00"
or "ST01".
"ST00" refers to the Memory is empty, and "ST01"
refers to the Memory contains scenes and the current
scene(the first step) is playing.
SCENE
K
4. Tap Scene button, these three LED's of Scene, Chase
and Record shall flash in unison, the Segment Display
shows "bk01" and the scenes recorded in the bank is
indicated by their lit LED's.
