2. Operation Guide
2. Operation Guide
2.1.2 Delete a scene
7
8
2.1 Recording Scenes
2.1.1 Recording scenes into a Bank
SCENE
K
1. Apply power on, the Segment Display reads "bk01",
tap Scene button causing its LED to light or flash.
2. Select the Bank using UP/DOWN button, there are
total 24 banks, each bank can hold up to 40 scenes.
SCENE
RECORD
3. Press and hold down Record button for 3 seconds,
both Scene and Record LED's will flash indicating
recording is active, and the recorded scenes will be
indicated by the lit LED's.
4. Before you can record scenes, be sure DMX LED on
this unit is flashing. Select or create a scene on your
DMX controller in connection with this unit.
SCENE 1-40
RECORD
5. Keep pressing Record button, tap any of 1-40 buttons
to record the scene into this button, all LED's will flash
3 times briefly indicating this operation.
6. Continue steps 3-4 until you've recorded up to 40
scenes into a bank. Tap Blackout button to go back.
SCENE
RECORD
1. Enter Record mode, both Scene and Record LED's
will flash.
2. Tap Scene button again, Record LED will light other
than flash, DMX LED will go out.
3. Use UP/DOWN button to select the Bank containing
the scene you wish to delete.
SCENE 1-40
AUDIO/DEL
4. Keep pressing DEL button, tap one of 1-40 buttons
that holds the scene you wish to delete, all LED's will
flash 3 times briefly indicating this operation.
2.1.3 Preview a scene
SCENE
RECORD
1. Enter Record mode, both Scene and Record LED's
will flash.
2. Tap Scene button again, Record LED will light other
than flash, DMX LED will go out.
3. Use UP/DOWN button to select the Bank containing
the scene you wish to have a preview.
