Elation Color Spot 575, Руководство пользователя

Страница: 10 / 47

Power Spot 575™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
10
10. Mode Button – This button is used to access the fixture’s main system menu and
programming functions.
11. Firmware Connection – This connection is designed to be used solely by a
qualified technician to upgrade and test the fixture.
12. Microphone - This microphone receives external low frequencies to trigger the
fixture in Sound-Active and Master/Slave mode.
13. DMX Input Jack – This jack is used to receive an incoming DMX signal or
Master/Slave signal.
14. DMX Output Jack – This jack is used to transmit the incoming DMX signal to
another DMX fixture, or transmit a Master/Slave signal to the next Power Wash
250™ in the chain. For best results in DMX or Master/Slave mode terminate this
jack if it is the last fixture in the chain. See “Terminator” on page 14.
15. Power On/Off Switch – This switch is used to control main power to the fixture.
16. Fuse Holder – This housing stores a 10 amp (5 amp 220v) GMA protective fuse.
Never defeat the fuse, the fuse is designed to protect the electronics in the event
of sever power fluctuations. Always be sure to replace the fuse with an exact
match as to the one being replaced, unless otherwise told to do so by an
authorized Elation® service technician.