Elan MAC24, Руководство по установке, Страница: 16 / 40

Page 16 ©2004 ELAN Home Systems. All Rights Reserved. 04/04.
ELAN HOME SYSTEMS
MUSIC AND COMMUNICATIONS
DISTRIBUTION CENTER
MAC24
INSTALLATION MANUAL
SPEAKER OUTPUTS
M
M
L R
M
M
L R
M
M
L R
M
M
L R
Z660 6X60 MULTI-CHANNEL POWER AMPLIFIER
L
R
Line Level Outputs
MAC24 DISTRIBUTION CENTER
Stereo
speaker
pair w/ stereo
volume control
Mono speakers
w/ mono volume
controls
“Y” Outputs 1 & 2
to create a MONO
signal to route to
other Inputs
1. Connect an RCA stereo patch cable from the
LINE LEVEL OUTPUTS of the MAC24 to LINE
INPUTS 1 & 2 of an ELAN Z660 Multi-channel
Power Amplifier.
2. To create additional stereo channels, connect a
stereo RCA patch cable from the Z660’s LINE
OUTPUTS 1 & 2 to LINE INPUTS 3 & 4.
3. To create mono channels, “Y” LINE OUTPUTS 1
& 2 (or 3 & 4) to additional Z660 INPUTS. Use sin-
gle RCA (mono) patch cables to go from a mono
OUTPUT to a mono INPUT.
4. Connect stereo speaker pairs to MACVSO Stereo
Volume Controls w/Override.
5. Connect MACVSOs to Z660 stereo speaker OUT
PUTS.
6. Connect mono speakers to MACVMO Mono
Volume Controls w/Override.
7. Connect MACVMOs to Z660 mono speaker OUT
PUTS.
8. Connect the VC+ and VC- terminals of each
Volume Control in parallel with all other VC+ and
VC- wires of the Volume Controls connected to
the MAC24.
See Volume Control Connections p. 19.
Make sure to use the correct MACVSO/
MACVMO Impedance Match settings.
See Z660 Installation Manual for details.
Using the MAC24 Line Level Outputs to Add More Rooms of Music
(continued)
When adding a combination of Stereo & Mono Speakers: