11 of 12
g!
C
ONFIGURATION
D
ETAILS
The following table provides settings used in the g! Configurator. Please refer to the
g!
Configurator Reference Guide
and the
ELAN UltraMatrix Designer’s
Guide
for more details.
Devices
Variable Name
Setting
Comments
Communication Devices
RS-232
Name
<User Defined> (Default: New Device)
Elan recommends altering the name to be device specific.
Type
Serial Port
Communication Type Standard Connection
Com Port
<Select>
Ethernet
N/A
N/A
No Communication Device Required for Ethernet Communication
Zone Controller
Name
<User Defined>
Display Name for the device
Device Type
ELAN gMVxx (connection Type)
Not Editable - defaults to Device type and connection type
IP Address
<Display Only>
Not editable - for reference only. N/A when using RS-232
Port
<Display Only>
Not editable - for reference only. N/A when using RS-232
gMV Device
<Select>
Chose after Discovering devices. N/A when using RS-232
Paging
<Select>
Select Paging support for this UltraMatrix
Sense Input
<Select>
Sense input triggering Page Mode. N/A if Paging is No.
Energy Efficiency Mode
<Select>
See Elan Designer's Guide and Installation Manual for details on ErP Modes.
Sources
Source Device
<Select>
Select Preconfigured Source Device.
Display Icon
<Select>
Select an Icon for the Source
Source Volume
<Select>
Refer to the
g! Training Guide
for more details
Display Name
<User Defined>
Display Name for the Source in interfaces.
Audio Input Type
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
Audio Breakout
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
2 Ch. / Multi Ch.
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
Bi-Wire
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
HDMI Input
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
Audio Input
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
NOTE: Advanced Settings are behind the "Edit" button. Please refer to the ELAN UltraMatrix Designer's Guide for full details.
NOTE: Each Source node must be added manually.
Zones
Name
<Select>
Display Name for the Zone in interfaces.
Universal Receiver
<Select>
IR Receiver for this Zone
Display 1
<Select>
Select Preconfigured Primary Display for this Zone
Display 2
<Select>
Select Preconfigured Secondary Display for this Zone
Slave Zone 1
<Select>
Refer to the
g! Training Guide
for more details
Slave Sone 2
<Select>
Refer to the
g! Training Guide
for more details
Turn On Source
<Select>
Refer to the
g! Training Guide
for more details
Hide Volume
<Select>
Audio Return Input
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
MV Outputs
Audio Output Type
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
Analog to Digital
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
Audio Output
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
Video Output
<Select>
Refer to ELAN UltraMatrix Designer's Guide for full details.
NOTE: Advanced Settings are behind the "Edit" button. Please refer to the ELAN UltraMatrix Designer's Guide for full details.
NOTE: Each Source node must be added manually.
