Smart-Keyboard eSK-R30B-X
18
••••
Solution Specification (V1.3) 01.25.2013
(This specification is subject to change without further notice)
Bottom view(Unit: mm) :
Figure 6-3 Bottom View
NOTE
1.
PCB dimensional tolerances are ±0.3mm.
2.
Component area tolerances are ±0.05mm
3.
We suggest that using system holders strengthen the Smart-Pad
TM
PCB
stability.
Put the system holder (it should be an insulator) to aim at the center of holder
area, moreover the diameter of the holder area is 10mm.
Figure 6-4 Side View with CON PCB + Adhesive