4
Effects
2gobo wheels:
-Wheel with 6HQ dichroic, indexable and interchangeable rotating gobos
-Variable rotating wheel with 18+1 fixed metal gobos; Advanced Animation disc
2 indexable and interchangeable rotating prisms(8-facet and linear prism)
Frost unit to soften the beam edge
High precision 0-100% dimmer
Mechanical shutter and strobe effect
Control
30/34 DMX 512 control channels
Moving
body
Angle: PAN=540degrees Tilt=244 degrees/Automatic repositioning of PAN and Tilt
Elec-
tronics
Long life self-charging buffer battery
ON/OFF lamp control by DMX
Cooling system monitoring
Firmware upgraded by DMX cable with no power
Weight
30KG
Size
460x323x574mm(L W H)
3. General Guidelines
4. Cleaning And Maintenance
• This fixture is a professional lighting effect de-
signed for use on stage, in nightclubs, in thea-
tres, etc. Do not attempt operation or installa-
tion without a proper knowledge on how to do
so.
• This fixture was designed for indoor use only.
• Consistent operational breaks may ensure that
the fixture will function properly for many years
to come.
• Do not shake the fixture around. Avoid brute
force when installing or operating the device.
• While choosing an installation location, please
be sure that the fixture will not be exposed to
extreme heat, moisture or dust. The minimum
distance between the fixture and a wall or flat
surface should be at least 1 meter (about 3.5ft).
• Always install the fixture with an appropria-
te safety cable. When installing the fixture in
a suspended environment always be sure to
use mounting hardware no less than M10 x 25
mm, also be sure the hardware is insert in the
pre-arranged screw holes in the base of the
fixture.
• When using the quick release “Omega” cam-
lock system, be sure the four quick lock faste-
ners are locked in the quick lock holes correctly.
• Do not attempt to operate this fixture until you
have familiarized yourself with its functions.
• Do not permit operation by persons not quali-
fied for operating this type of theatrical fixture;-
most damages are the result of operations by
nonprofessionals.
• Please use the original packaging to transport
the fixture in for service.
• If a projector can’t start, please check if the
fuse is blown up. If it does, replace it with a
new fuse with same ratings. And the projector
has over-temperature protective device. If the
temperature is too high, the protective device
will be triggered to shut the projector off. When
it happens, please check if the fans run normally
or fan shield is blocked by dust. After the issue
is solved, restart the projector.
• The accumulation of oil, smoke and dust on the
lens will compromise the light output.
• Cleaning a projector is very necessary to en-
sure a reliable use of it. Cooling fans need to
be cleaned every 15days. Internal lens, reflector
and hot mirror need to be cleaned periodically
to optimize light output.
• Cleaning frequency is to be decided by ope-
rations and its environment. Use soft cloth
and normal detergent for glass for cleaning
work. It’s advised external optical system be
cleaned every 20days and internal optical sys-
tems every 30/60days. Keep lens clean and do
not touch optical parts with bare hands.
