7
1. Use DMX512 controller, use the DMX signal (male) to plug into the first lamp (female)3 &5pin.
2. Put out of the equipment of the first signal wire (head), connected to the equipment of the next 3 pin
plug (female), and so on, the output terminal of the following inputs have been connected to it (see pic-
tures below).
3. The fixture should be the last one a 120Ω resistor in series between the output of 2,3 Caron seat.
3.4 DMX Signal Connection
3.5 DMX Address Setting
4.1 Control panel features
Terminator
DMX Signal Connection
How to turn the controller line from 3-pins into
5-pins (plug and socket).
4. Operating Instructions
Button
Function
MENU
Select the menu or function exit
ENTER
The currently selected function or to enter the cu-
rrently displayed menu or displays the current menu
UP
Flip up the menu list, or increase the value
DOWN
Scroll down the menu list, or decrease the value