10
[DMX Mode Select]
• Press the MENU button, the operation UP or DOWN key to
select
[DMX MODE]
menu, and then press ENTER.
• Operation UP or DOWN key to select
[Stand mode]
,
[Ba-
sic mode]
,
[Extand mode]
. Press ENTER to save
[Test Mode]
• Press the MENU button, the operation UP or DOWN key to
select
[TEST]
menu, and then press ENTER key to enter.
• Operation UP or DOWN key to select
[Test Beam
],
[Test
Aura]
,
[Test All]
. Press ENTER to save.
[Color Temperature Select]
• Press the MENU button, the operation UP or DOWN key to
select
[Linear CTO]
menu, and then press ENTER key to
enter.
• Operation UP or DOWN key to select eight kinds of color
temperature (2500K-10000K). Press ENTER to save.
[System Settings]
• Press the MENU button, the operation UP or DOWN key to
select
[SET]
menu, and then press ENTER key to enter.
• Operation UP or DOWN to select
[White Balance],
[Dimmer Curve]
,
[Fan Control]
,
[FactoryReset], [Disp.
setting].
• When you select
[RGBW]
menu, this menu is to set the
LED white balance adjustment, effective when you select
ON, when the menu is open, go to Main Menu
[CAL Para-
meter]
settings are effective inside, press ENTER to save.
• When you select
[Dimmer Curve]
menu, press ENTER
to enter, operate the UP or DOWN to select
[ON/OFF],
[Gamma1], [Gamma2], [Gamma3], [Gamma4],
respecti-
vely, is disabled on dimming curve, select dimming curve
1, curve 2 dimming, dimming curve 3, dimming curve 4.
press ENTER to save.
• When you select
[Disp.setting]
menu, press ENTER to
enter, operate the UP or DOWN select
[Shut off time]
,
[
Flip display], [Disp flash],
select Shut off time when,
press ENTER to enter, operate UP or DOWN select
[02-
60m]
, adjustable LCD backlight off time: 2-60 minutes,
select
[flip display]
, press ENTER to enter, operate the
UP or DOWN to select
[ON / OFF]
to set the flip display.
Select
[Disp flash]
when, press ENTER to enter, operate
the UP or DOWN to select
[ON / OFF],
when you select
ON, when no DMX signal, the display backlight flashes.
Press ENTER to save.
• When you select
[FactoryReset]
menu, press ENTER
to enter, operate the UP or DOWN to select
[ON / OFF],
this menu function is to restore the factory settings, press
ENTER to save.