11
[System message]
• Press the MENU button, the operation UP or DOWN key to
select
[INFO]
menu, and then press ENTER key to enter.
• When you select
[Time Info]
, press ENTER key to enter,
operate the UP or DOWN key to select
[Power on], [Ttl
Life hrs]
or
[Last Run Hrs]
, if you select
[Power on],
press ENTER to access to the display device the last time
the power running “XXXX” hours. If you select
[Ttl Life
hrs]
, press ENTER enter to display the total run time of the
device “XXXX” hours, if you choose
[Last Run Hrs]
, press
ENTER to enter the LED display the last run time “XXXX”
hours.
• When you select
[Temp Info]
, then press ENTER to enter
the
[Head Temp1]
,
[Head Temp2],
press ENTER and the
head temperature display “XXX °C”.
• When you select
[Software Ver]
to show the software ver-
sion of the device and press ENTER to enter.
[White balance adjustment]
• Press the MENU button, the operation UP or DOWN key
to select
[CAL Parameter]
menu, and then press ENTER
key to enter.
• Operation UP or DOWN select
[Beam1 RGB], [Beam2
RGB],
press ENTER to enter optional Red0-255,
Green0-255, Blue0-255, press ENTER to save after the
operation.
• NOTE: To enable this feature inside the RGBW SET menu
must be set to take effect in the ON state.
5. DMX Channel Table
Channel
DMX value
Function
1
0-255
Beam Red 0-100%
2
0-255
Bema Green 0-100%
3
0-255
Beam Blue 0-100%
4
0-255
Beam White 0-100%
5
0-255
Aura Red 0-100%
6
0-255
Aura Green 0-100%
7
0-255
Aura Blue 0-100%
8
0-255
Beam Macro colour
9
0-255
Aura Led effect
10
0-255
Aura Led speed slow-fast
11
0-31
Strobe
LED turn off
5.1 Basic mode (13CH)