090001113
- TECHNICAL MANUAL -
LUPUS2K - VOLANS2K
elmospa.com
9
9. MOUNTING
Example of LUPUS2K transmitter mounting inside the housing of a
roll-up shutter. One of the possible fixing positions is indicated in the
picture on the right.
Search the best position in order to easily replace the battery when
needed: a possible position could be the external side of the box.
If you need an additional fixing support, avoid using a metal one in
order not to worsen the radio signal.
Note
: the maximum distance from the roll-up shutter sensor can be
set via software to 1 or 8 meters: this is helpful in case of installation
with large windows, or in case you need to install the transmitter far
from the window.
Example of general mounting,
phase 1
.
HORIZONTAL
ADJUSTMENT
6.5 mm
MAX
NOMINAL
DISTANCE
5 mm
WARNING!
IN ORDER TO ACCESS THE UPPER FIXING
HOLE, PUSH OPEN THE PLASTIC CLIPS TO
UNHOOK THE ELECTRONIC BOARD AND
REMOVE IT.
FOR VOLANS2K, ALSO UNSCREW THE PIEZO
SENSOR WIRES FROM ITS TERMINAL BOARD.
TSV FIXING SCREWS
SUPPLIED WITH
WALL DOWELS
ALIGN THE REFERENCE ON
THE MAGNET BASE WITH
THAT ON THE SIDE OF
THE TRANSMITTER
