EL-CELL PAT-Chamber-16 C, Руководство пользователя

Страница: 31 / 38

Page 5 of 12
Quick Guide EC-Link-Software (PAT-Tray, PAT-Stand-16, PAT-Chamber-16)
Release 2.5
4 Running the EC-Link Software
The EC-Link software continuously acquires data at a fixed rate of about 1 Hz. The signals of
the inserted test cells are displayed in strip charts, one chart for each cell. If no test cell is
inserted, the corresponding channels are displayed as zero. Data recording can be started for
an inserted test cell only.
The insertion and recording status of all cell positions is given in the test cell table.
1. Data recording for a given cell can be started in two ways.

Insert a new cell into the docking station and follow the instructions of the ‘ New
cell detected ’ dialog.

Press the ‘ Record ’ button of a cell which has been inserted previously and has
not been started at that time.
1
2
3
2
4
2
1
2