El-Björn A 150 VTI, Инструкция по эксплуатации

Страница: 21 / 28

- 21 -
INSTALLATION
Container drying
Container drying is primarily used for drying timber.
The example below shows how the dehumidifier can
be connected to a container.
The dehumidifier is located outside the container.
A hole is made in the container, which is connected
to the dehumidifier’s air inlet.
The dry air from the dehumidifier is conducted back
into the container through a duct bend.
The container is equipped with fans to ensure air
circulation. For improved results, the fans can be
reversed after a set time so that the air flow inside
the container changes direction.
1. Container (not included).
2. Axial fan (not included).
3. Hood (not included).
4. Dehumidifier A 150VTI
NOTE!
Only the dehumidifier shown in this
example is included.
Other parts, e.g. container, hood and axial
fans, are not supplied by El-Björn AB.
4+3
2
1
1
2
3
4