El-Björn A 150 VTI, Инструкция по эксплуатации

Страница: 17 / 28

E GT 2 GT3
GT1
H1
H2
K4
K3
K2
DESCRIPTION
Function
Dehumidifier A 150 VTI
The A 150VTI is a condensation dehumidifier, and
is based on the principle that air moisture condenses
on cold surfaces. The cold surfaces are created on
the evaporator (AEV) when the compressor (M2)
transfers heat from the evaporator to the condenser
(KD).
The dehumidifier is equipped with a fan (M1) that
transports the air through the dehumidifier.
The air first passes through the evaporator (AEV),
where the moisture condenses and is deposited on the
evaporator.
The water is collected in a tray fitted under the
evaporator and is drained away.
The air then passes through the fan (M1) and
condenser (KD). In the condenser, the air
is warmed up and the condenser is simultaneously
cooled. If necessary, the air can be heated up by a
heating coil (E) before leaving the dehumidifier.
Evaporating refrigerant
Components
AEV Evaporator
FT Dryer filter
GP Pressure switch, double
KD Condenser
M1 Fan
M2 Compressor
MU Measurement outlet
MV1 Solenoid valve
SD Expansion valve
- 17 -
E
CP
M1
DF
MV1
SD
AEV
M2
Humid air
Dry air
MV1
QF1
T1