This product is intended for installation by expert users only.
Please consult with a qualified technician for installation. Improper
installation may result in damage to the equipment. EK Water
Blocks assumes no liability whatsoever, expressed or implied,
for the use of these products, nor their installation. The following
instructions are subject to change without notice. Please visit our
website at www.ekwb.com for updates. Prior to the installation
of this product, please read important notice, disclosure, and
warranty conditions printed on the back of the box.
Before you start using this product please follow these basic guidelines:
Carefully read the manual before beginning with the
installation process!
Remove your motherboard from the chassis for the safest
mounting process and to prevent any possible damages.
EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured with the
rubber o-ring gaskets.
The use of quality market-proven corrosion-inhibiting
coolants is always strongly recommended for any liquid
cooling system.
