ekwb EK-RES X3 D-RGB, Руководство пользователя

Страница: 5 / 9

- 5 -
INSTALLING THE RESERVOIR MOUNTING HOLDERS
EK-RES X3 series reservoirs come with a pair of specially-made EK-
Reservoir holders. These holders are meant to be installed directly
on the computer chassis.
If there are no appropriate mounting holes available, you may need
to drill two (2) Ø4mm holes through a chassis panel with an electric
power drill.
STEP 1
Use the enclosed M4 screw, washer, and nut to mount the reservoir
holder through the pre-drilled hole on the computer chassis (as
shown in the picture).
STEP 2
STEP 1
M4 Nut
Reservoir
PC Chassis
STEP 2
Install the reservoir on the reservoir holders. Using just a slight force
is enough for the reservoir to “click” into position. The clamps should
always hold onto the acrylic tube, not the acetal top or bottom.
M4 Washer
M4 Mounting Screw
PC Chassis
Reservoir Holder