- 11 -
STEP 2
Use six (6) M4x4 DIN7984 screws from the mounting mechanism
packaging to secure the assembly to the front chassis mounting
holes. For extra rigidity, find the distribution plate screw holes
that match the cutout slots of the back side panel and use two (2)
Metal Washers M4 x 0.8 and two (2) M4 x 6 DIN7984 screws to
tighten the distribution plate.
STEP 2
INSTALLING THE EK-Quantum Reflection
2
Torrent DDC 4.2 PWM D-RGB DISTRIBUTION PLATE INTO CHASSIS
STEP 1
A)
Tilt the whole distribution plate assembly, so it fits inside the
case.
B)
When the assembly is inside the case, push it as far to the upper
right corner as possible.
C)
Then rotate the bottom assembly until it’s aligned with the front
case mounting holes.
Two M4x6
Two METAL
WASHERS
M4x0.8
For this step, you need:
2.5 mm Allen Key
(A)
(B)
(C)
STEP 1
Six M4x4
DIN7984