- 12 -
STEP 3
If you plan to use the bottom radiator and the front radiator, make
one straight tube that will go directly from the front to the bottom
radiator and one 90° tube from the distribution plate to the radiator.
We suggest the straight tube be 93.5mm long and match its end
with the 90° tube. Then you can push the tubes into radiator ports
and tighten the fittings.
Now, tilt the case on its side panel and tighten the bottom radiator
screws you can reach.
STEP 3
90° TUBE
STRAIGHT TUBE
TIGHTEN ALL
SCREWS YOU
CAN REACH.