- 3 -
STEP 2
Unscrew the M4 x 22 screw using the enclosed 2.5mm Allen key and
remove it from the block.
STEP 2
STEP 1
Install your EK-Quantum Velocity or Velocity Strike CPU water block in
the illustrated orientation and place the motherboard on a secure flat
surface. Using the enclosed 8mm Allen key, install all four (4) fixation
fittings to the pre-installed VRM block and CPU block.
Always consult the latest available manual for CPU block
installation. Do not use excessive force when tightening
the fittings.
STEP 1
Fixation Fitting
M4 x 22 Screw
