- 39 -
3. INSTALLATION DU SUPPORT DU PROCESSEUR INTEL LGA-115X
ÉTAPE 1 : RETRAIT DE LA CARTE
MÈRE
Si le boîtier de votre ordinateur ne dispose pas
de découpe du côté inférieur du processeur de
la carte mère, vous devez retirez la carte mère
de votre ordinateur.
ÉTAPE 2 : FIXATION DE LA PLAQUE
ARRIÈRE À LA CARTE MÈRE
Fixez la plaque arrière Intel pour le support du
processeur LGA-115x à l’arrière de votre carte
mère. Alignez les trous de la carte mère par
rapport aux trous de la plaque arrière.
ÉTAPE 3 : FIXATION DES VIS DE
MONTAGE
Fixez les quatre vis papillons LGA-115x à
travers la carte mère jusqu’à la plaque arrière.
Les vis doivent être installées sans utiliser
d’outils (c.-à-d. pinces).
Commencez à serrer deux vis à la fois, de
préférence en croix, mais ne les serrez pas
complètement jusqu’à ce que toutes les quatre
soient partiellement vissées.
ÉTAPE 6: FIXATION DES SUPPORTS
DE MONTAGE
Utilisez 4x vis M4x4 pour fi xer 2x supports Intel
sur le groupe de pompage.
Prenez garde de ne pas toucher, ni
endommager le composant thermique
préalablement appliqué!
M4x4
Support de
montage Intel
ÉTAPE 4: FIXATION DES VENTILA-
TEURS SUR LE RADIATEUR
Fixez les ventilateurs (un, deux ou trois selon
la version du système de refroidissement tout-
en-un) sur le radiateur à l’aide des vis UNC 6-32
x 30 mm.
UNC
6-32 x 30 mm
Ventilateur
Radiateur
ÉTAPE 5: RETRAIT DE LA FEUILLE DE
PROTECTION DE LA PLAQUE FROIDE
Retirez la feuille de protection de l’arrière
du groupe de pompage, qui sert à éviter
d’endommager la plaque froide et le
composant thermique préalablement appliqué
sur la plaque froide.
Lors du retrait de la feuille de protection et de
l’installation, prenez garde de ne pas toucher,
ni endommager le composant thermique
préalablement appliqué!
ÉTAPE 7: FIXATION DE LA POMPE
Essuyez la surface de contact du processeur (à
l’aide d’un torchon non abrasif ou d’un bâtonnet
ouaté comme indiqué sur la fi gure).
Alignez la pompe par rapport aux vis de
montage et au processeur comme indiqué sur
la fi gure.
Placez les ressorts de compression et les
écrous à ailettes fournis sur les vis de montage
(4x). Commencez à serrer deux écrous à ailettes
à la fois, de préférence en croix, mais ne les
serrez pas complètement jusqu’à ce que tous
les écrous soient partiellement vissés.
Écrou à
ailettes
Ressort
Chiffon non
abrasif
IHS
La feuille de
protection
Le composant
thermique
préalablement
appliqué
Vis papillon pour
le support
du processeur
INTEL LGA 115x /
AMD AM4
Plaque arrière
Intel LGA 115x
Содержание EK-AIO Elite 280 D-RGB
