- 21 -
SCHRITT 5: ANBRINGUNG VON
MONTAGEHALTERUNGEN (AMD)
Verwenden Sie vier M4 x 4-Schrauben, um
zwei AMD-Halterungen an der Pumpeneinheit
anzubringen.
Es muss darauf geachtet werden, dass die
vorab aufgebrachte Wärmeleitpaste nicht
berührt oder beschädigt wird!
M4x4
Montagehalterung
AMD
SCHRITT 6: INSTALLATION DER
PUMPENEINHEIT (AMD)
Wischen Sie die Kontaktfl äche der CPU ab (mit
einem nicht scheuernden Tuch oder einem
Wattestäbchen, wie im Beispielbild gezeigt).
Richten Sie die Pumpeneinheit, wie
in der Abbildung gezeigt, über den
Befestigungsschrauben und der CPU aus.
Legen Sie die beiliegenden Druckfedern und
Flügelmuttern über die Befestigungsschrauben
(4x). Ziehen Sie zunächst zwei Flügelmuttern
hintereinander an, vorzugsweise überkreuz,
und ziehen Sie sie erst dann fest, wenn alle
eingeschraubt und etwas angezogen wurden.
Flügelmutter
Feder
Nicht
scheuerndes
Tuch
IHS
SCHRITT 8:
PUMPENANSCHLUSSKABEL (AMD)
D-RGB
Anschluss
VDG Anschluss
4-poliger Anschluss
SCHRITT 7: EINBAU DER LÜFTER-
BAUGRUPPE UND DES KÜHLERS IN
EIN PC-GEHÄUSE (AMD)
EK-AIO Elite 360 D-RGB / EK-AIO Elite 280
D-RGB
Option 1
Verwenden Sie die UNC 6-32 x 34 mm
Schrauben, um das vormontierte Kühler-Lüfter-
Setup mit den restlichen drei / zwei Lüftern
(insgesamt sind es dann sechs / vier Lüfter) am
PC-Gehäuse zu befestigen.
Die Ausrichtung der Lüfter ist entscheidend, um
die beste Leistung des Heizkörpers zu erzielen.
Installieren Sie die Lüfter so,
dass die Luft durch den Heizkörper geleitet
wird. Damit die Ausrichtung des Lüfters korrekt
ist, beziehen Sie sich auf die Position des EK-
Logos auf der Seite des Lüfters. Es muss auf
die gleiche Weise am unteren und oberen
Lüftersatz ausgerichtet sein. Es wird außerdem
empfohlen, dass die Kabel aller Lüfter für ein
einfacheres Kabelmanagement in die gleiche
Richtung verlaufen.
Option 2
Wenn nicht genügend Platz in Ihrem PC-
Gehäuse vorhanden ist, um alle sechs / vier
Lüfter auf dem Kühler zu platzieren, können Sie
die restlichen drei / zwei an einer anderen Stelle
in Ihrem PC positionieren.
Verwenden Sie in diesem Fall die UNC 6-32 x 6
mm Schrauben, um den vormontierten Kühler
und die Lüfter am PC-Gehäuse zu befestigen.
UNC 6-32 x 34 mm
(12x / 8x)
EK-AIO Elite 360 D-RGB / EK-AIO Elite 280 D-RGB
Содержание EK-AIO Elite 280 D-RGB
