- 20 -
Schritt 8: Pumpenanschlusskabel
(AMD)
D-RGB
Anschluss
VDG Anschluss
4-poliger Anschluss
Schritt A:
Verbinden Sie den 4-poligen PWM-Stecker der
Pumpe mit dem Motherboard.
D-RGB Kopf
RGB Kopf
Schritt B:
Verbinden Sie den 3-poligen Stecker der
D-RGB-LED für die Pumpe mit dem D-RGB-
ANSCHLUSS auf dem Motherboard. Die LED
funktioniert, wenn die Steckerbelegung auf
dem Anschluss wie folgt ist: + 5V, Digital, Leer,
Masse. Bei einigen Motherboards können Sie
alternativ einen VDG-Anschluss anstelle eines
D-RGB verwenden, um die LED anzuschließen.
Es muss sichergestellt werden, dass
der auf dem Anschluss angege-
bene Pfeil an die auf dem Mother-
board ange 5V-Leitung
angeschlossen wird. Wird eine
LED-Diode an den 12V-RGB-KOPF
angeschlossen, können die LEDs
beschädigt werden.
Der Anschluss ist bei der D-RGB-
und RGB-Version identisch, die
D-RGB-Version verfügt jedoch
über 3 Kabel vom Anschluss zur
Leiterplatte. Die RGB-Version
verfügt über 4 Kabel. Wenn D-RGB
an einen normalen RGB-Kopf
angeschlossen wird, könnte das
Motherboard oder der LED-Streifen
beschädigt werden.
Schritt 7: Einbau der Lüfterbau-
gruppe und des Kühlers in ein PC-
Gehäuse (AMD)
Befestigen Sie die Baugruppe aus Kühler und
Lüfter mit den Schrauben UNC 6-32 x 6 mm
am PC-Gehäuse.
UNC 6-32 x 6 mm
(4x)
UNC 6-32 x 6 mm
(8x)
UNC 6-32 x 6 mm
(12x)
EK-AIO 120 D-RGB
EK-AIO 240 D-RGB
EK-AIO 360 D-RGB
Содержание EK-AIO 120 D-RGB
