- 17 -
Schritt 9: Pumpenanschlusskabel
D-RGB
Anschluss
VDG Anschluss
4-poliger Anschluss
Schritt A:
Verbinden Sie den 4-poligen PWM-Stecker der
Pumpe mit dem Motherboard.
D-RGB Kopf
RGB Kopf
Schritt B:
Verbinden Sie den 3-poligen Stecker der
D-RGB-LED für die Pumpe mit dem D-RGB-
ANSCHLUSS auf dem Motherboard. Die LED
funktioniert, wenn die Steckerbelegung auf dem
Anschluss wie folgt ist: + 5V, Digital, Leer, Masse.
Bei einigen Motherboards können Sie alternativ
einen VDG-Anschluss anstelle eines D-RGB
verwenden, um die LED anzuschließen.
Es muss sichergestellt werden, dass
der auf dem Anschluss angegebene
Pfeil an die auf dem Motherboard an-
ge 5V-Leitung angeschlos-
sen wird. Wird eine LED-Diode an
den 12V-RGB-KOPF angeschlossen,
können die LEDs beschädigt werden.
Der Anschluss ist bei der D-RGB- und
RGB-Version identisch, die D-RGB-
Version verfügt jedoch über 3 Kabel
vom Anschluss zur Leiterplatte. Die
RGB-Version verfügt über 4 Kabel.
Wenn D-RGB an einen normalen
RGB-Kopf angeschlossen wird,
könnte das Motherboard oder der
LED-Streifen beschädigt werden.
Schritt 8: Einbau der Lüfterbau-
gruppe und des Kühlers in ein PC-
Gehäuse
Befestigen Sie die Baugruppe aus Kühler und
Lüfter mit den Schrauben UNC 6-32 x 6 mm
am PC-Gehäuse.
UNC 6-32 x 6 mm
(4x)
UNC 6-32 x 6 mm
(8x)
UNC 6-32 x 6 mm
(12x)
EK-AIO 120 D-RGB
EK-AIO 240 D-RGB
EK-AIO 360 D-RGB
Содержание EK-AIO 120 D-RGB
