- 14 -
Plug the 8-pin PCIe connector from the power supply to the
connector of the EK-QuantumX Delta TEC CPU water block
controller unit.
The installation of the CPU water block is now complete.
CONNECTING THE TEC PLATE ELECTRONICS
STEP 3
It is mandatory to do the following:
1. Unplug the pump 4-pin PWM connector from the motherboard FAN
header (if already installed).
2. Plug the pump 4-pin PWM connector into the male 3-pin FAN connector
on enclosed EK-Cable Pump Testing Adapter (see picture under STEP3
for explanation).
Your system is now ready to be charged for the first time. Inspect all parts of
the loop, and in case the coolant leaks, fix the issue and repeat the testing
process. To prevent possible damage, ensure that all hardware is dry before
the system is powered on.
Pump Testing
Adapter Fan Header
Pump Power Cable
STEP 3